Hexagonal blind rivet bolt cylindrical head Steel

To download the 3D format connected to the portal  cadenas logo partsolutions  

MATERIAL

Rivet nut: Steel C10

SURFACE TREATMENTS

ZGalvanizing with high resistance passivation

Steel
Steel
d Type r
max
M1 M B S L
min
Li Le Code Code
M5 EM/C 0,5 ÷ 3,0 8,1 7 6,9 10 1,0 15 12,0 27 65405103 500 65405101 2.000 714
(7000 N)
0,7
(7 Nm)
M5 EM/L 25 37 65405303 65405301
M6 EM/C 0,5 ÷ 3,0 9,1 9 8,9 13 1,5 15 14,1 29,5 65406103 500 65406101 2.000 1019
(10000 N)
1,0
(10 Nm)
M6 EM/L 25 39,5 65406303 65406301
M8 EM/C 0,5 ÷ 3,0 9,6 11 10,9 16 1,5 20 15,6 35 65408103 500 65408101 1.000 2140
(21000 N)
3,0
(30 Nm)
M8 EM/L 25 40 65408303 65408301

 

BLIND RIVET BOLTS

 

Blind rivet bolts, in principle, are installed using the same method as for blind rivet nuts. They can then be applied using the same tools, equipped with appropriate heads and tie rods.
Blind rivet bolts offer the possibility of having a threaded pin, of different sizes, on which to apply a nut, even on small thicknesses or in those situations where machining is not possible or access from only one side is required.
Blind Rivet Bolts provide an alternative to welded or press-fit studs, allowing for a quick and cost-effective application.
■ Permanent fastening
■ Quick installation
■ Presence of filler material
■ No heat transfer, i.e. no change in material structure
■ Single-sided fastening
■ Easy installation
INS-MASCHIO-GB

OPERATING PRINCIPLE

 

The properly dimensioned rivet nut is screwed onto the tie rod of the riveting tool, then inserted into a calibrated hole according to the chosen diameter.
The riveting tool exerts a traction force on the tie rod, which radially deforms the compression chamber of the insert, until it clamps it onto the material. Once the i rivet nut is tightened, the riveting tool, the tie rod is unscrewed to release the thread that will accommodate the nut.
Setting phases:
■ Screwing
■ Introduction / Clamping
■ Unscrewing
APP-INS-MASCHIO-GB

HEXAGONAL BLIND RIVET BOLTS

 

HexagonalBlind rivet bolts are used in cases where the rotation of the element must be completely eliminated. They must be applied in holes obtained by hexagonal punching.
EM-GB