RAC 181 - Hydropneumatic tool for blind rivets

Code 700181

RAC 181
RAC 181

HYDRO-PNEUMATIC RIVETING TOOL

with sheared nail recovery safety system, designed for the fastening of standard aluminum rivets from D. 2,4 to 6 mm (Ø 6 mm in aluminium) and high performance rivets up to D. 4.8 mm.

THE RIVETING TOOL

weighs 1.6 kg and is capable to supply a force of 10600N with a stroke of 20.5 mm. Lightweight and ergonomic, it is equipped with a joint for compressed air on both sides.
Standard rivets Multistage rivets Multinox Tamp Farbolt X/S -Trifar
2,4
3
3,2
3,4
4
4,8
5,2
6
Standard rivets Ø 6 only in aluminium.

Maintenance instructions are available in the Video section.
Maximum force 10526 N.
Stroke 21 mm.
Download the manual - Model sold until 27/06/2018 (rev. 01) RAC181 use manual
Download the manual - Model sold from 28/06/2018 (rev. 02) RAC181 maintenance manual
Which is the correct nozzle for a blind rivet? Reference table for noozles
Code Description View
705023 Angle head Angle head
721314 Extended head 130 mm Extended heads
720973 Extended head 210 mm Extended heads
719007 Extended nozzle U1 ø 2,5 ÷ 3,2 Extended nozzles U1
719001 Extended nozzle U1 ø 3,5 / 4 Extended nozzles U1
719002 Extended nozzle U1 ø 4,8 Extended nozzles U1
719003 Extended nozzle U1 ø 6 ÷ 7,8 Extended nozzles U1
719008 Extended nozzle U2 ø 2,5 ÷ 3,2 Extended nozzles U2
719004 Extended nozzle U2 ø 3,5 / 4 Extended nozzles U2
719005 Extended nozzle U2 ø 5 Extended nozzles U2
719006 Extended nozzle U2 ø 6 ÷ 7,8 Extended nozzles U2
721876 Head with reduced section 35 mm Heads with reduced section
721877 Head with reduced section 60 mm Heads with reduced section
74000090 Kit for high-performance rivets FAR
71345652 Nozzle for rivet S-Trifar / X-Trifar ø 5,2 FAR
Pos. Code Description Qty Price/1 €
01 72000146 Handgrip 1 36.00
02 71346099 Valve 1 5.00
03 71346285 Valve cap 1 8.60
04 71C01372 Gasket OR 6 x 1,5 2 0.00
05 72000144 Push-button unit 2 12.50
06 72A00043 Push-button 1 3.90
07 713390 Gasket OR 2-007 2 0.60
08 72000154 Pneumatic cylinder 1 75.00
09 72000143 Hydraulic cylinder 1 102.00
10 711730 Gasket OR 2-119 1 1.20
11 71346103 Hydraulic piston 1 48.30
12 710917 Gasket OR 2-118 1 1.20
13 711974 Seeger ring JV 22 1 0.80
14 710901 Gasket B-102070 1 10.70
15 710908 Washer 1 0.30
16 710577 Gasket B-086055 1 10.70
17 71346101 Front connector 1 26.00
18 710300 Gasket OR 020 1 0.30
19 710579 Gasket OR 2-113 1 0.60
20 711729 Gasket OR 2-024 1 0.40
21 710102 Gasket OR 113 1 0.30
22 710859 Clamps holding cone 1 15.00
23 710555 Washer 400-004-4490 1 1.80
24 71C01278 Screw TBCE M6 x 6 ISO 7380 1 0.50
25 71346060 Sleeve carrying nozzle 1 22.00
26 717004 Nozzle for rivet ø 4,8 Cu / Steel 1 2.50
27 710853 Spring 1 0.60
28 710849 Clamps opener 1 4.30
29 71345507 High-performance clamps 3 6.20
30M 71346200 Cover 1 4.00
31 711706 Nails container 1 3.00
32 711336 Gasket OR 2-114 2 0.60
33 711357 Wrench kit 1 3.70
34 71346098 Flange 1 8.00
35 71346342 Rod 1 5.00
36 71346171 Silencer 1 0.00
38 71346106 Ring nut 1 9.00
39 71C01297 Gasket OR 2-043 2 1.20
40 71C01296 Seeger ring 100 UNI 7437 1 3.00
41 71346085 Protection bottom 1 14.00
42 71346094 Tube ø 8 x 7 1 1.80
43 711337 Gasket OR 2-021 1 0.60
44 71346084 Protection bottom 1 6.00
45 716377 Connector 6522 - ø 10 - 1/4" 1 7.80
46 71C01022 Cap 1/4" 1 1.60
47 71346107 Balancer hook 1 4.00
48 711732 Gasket OR 2-118 2 1.20
49 71346168 Baffle 1 2.00
50 710350 Gasket OR 2-109 2 0.60
51 717001 Nozzle for rivet ø 2,4 ÷ 3,4 1 2.50
52 717002 Nozzle for rivet ø 4 1 2.50
53 717003 Nozzle for rivet ø 4,8 All. 1 2.50
54 717005 Nozzle for rivet ø 6 / 6,4 1 2.50
55 717006 Nozzle for rivet ø 2,4 1 2.50
56 72A00053 Oil container assembly 1 12.50
57 712329 Reduction 1 3.30
58 71345212 Nails baffle 1 3.10
59 71C01495 Gasket OR 4 x 1,5 2 0.20
60 71C01496 Gasket OR 3 x 2 1 0.20
61 71346341 Rod 1 4.00
KIT A 740821 Anti-extrusion ring kit 5.80
KIT B 74000030 Pneumatic piston kit 24.00
KIT Q 74000096 Gaskets kit 15.00
KIT D 74000088 Cone holder kit 26.50
KIT F 74000078 Dampener kit 5.00
KIT G 741702 Plate kit 1.90
KIT H 74000079 Lever kit 6.00
KIT I 74000080 Coil kit 17.00
KIT M 74000086 Kit back connector 20.00
KIT P 74000094 Suction adjustment KIT 8.50
Maintenance and repair
INDEX OF THE DISPLAYED OPERATIONS
  • Read BEFORE watching the video
  • 01 - Preliminary operations
  • 02 - Disassembly of rear connector
  • 03 - Maintenance of the pneumatic unit
  • 04 - Disassembly of hangrip unit
  • 05 - Maintenance of the control lever
  • 06 - Maintenance of the coil kit
  • 07 - Disassembly of the hydraulic unit
  • 08 - Maintenance of the Cone holder
  • 09 - Maintenance of the hydraulic unit
  • 10 - Re-assembly of the hydraulic unit
  • 11 - Re-assembly of the pneumatic unit
  • 12 - Re-assembly of rear connector
  • 13 - Final operations
  • 14 - Disassembly/Re-assembly Rear connector for tools sold from April 11th, 2017 until March 13th, 2018
  • 15 - Disassembly/Re-assembly Rear connector for tools sold from March 14th, 2018
SET OF SPECIAL TOOLS SUPPLIED ON REQUEST

Rac181

  • Loctite: N. 270 - N. 542
  • Grease: Panolin Special Grease 2
  • Grease: Rheolube 362 HB
  • Set of commercial adjustable wrenches
  • Set of commercial allen wrenches
  • Rubber coated hammer
  • Pliers
  • Pliers for seeger rings
  • Set of screwdrivers

Instructions for use: model sold from 14/03/2018

Instructions for use: model sold from 11/04/2017 and until 13/03/2018

Instructions for use: model sold until 10/04/2017

Instructions for refilling the oil

Instructions for clamps maintenance

Instructions in case of nail's block