Nitonakrętki nitotrzpień cylindryczny Kołnierz Płaski - Stal

To download the 3D format connected to the portal  cadenas logo partsolutions  

MATERIAL

Rivet nut: Steel C10

SURFACE TREATMENTS

ZGalvanizing with high resistance passivation

Stal
Stal
d Typ r
max
D B S L
min
Li Le Kod Kod
M5 CM/C 0,5 ÷ 3,0 8,1 7 6,9 10 1,0 15 12,0 27 65305103 500 65305101 2.000 714
(7000 N)
0,7
(7 Nm)
M5 CM/L 25 37 65305303 65305301
M6 CM/C 0,5 ÷ 3,0 9,1 9 8,9 13 1,5 15 14,5 29,5 65306103 500 65306101 2.000 1019
(10000 N)
1,0
(10 Nm)
M6 CM/L 25 39,5 65306303 65306301
M8 CM/C 0,5 ÷ 3,0 9,6 11 10,9 16 1,5 20 15,5 35 65308103 500 65308101 1.000 2140
(21000 N)
3,0
(30 Nm)
M8 CM/L 25 40 65308303 65308301

 

BLIND RIVET BOLTS

 

Blind rivet bolts, in principle, are installed using the same method as for blind rivet nuts. They can then be applied using the same tools, equipped with appropriate heads and tie rods.
Blind rivet bolts offer the possibility of having a threaded pin, of different sizes, on which to apply a nut, even on small thicknesses or in those situations where machining is not possible or access from only one side is required.
Blind Rivet Bolts provide an alternative to welded or press-fit studs, allowing for a quick and cost-effective application.
■ Permanent fastening
■ Quick installation
■ Presence of filler material
■ No heat transfer, i.e. no change in material structure
■ Single-sided fastening
■ Easy installation
INS-MASCHIO-GB

OPERATING PRINCIPLE

 

The properly dimensioned rivet nut is screwed onto the tie rod of the riveting tool, then inserted into a calibrated hole according to the chosen diameter.
The riveting tool exerts a traction force on the tie rod, which radially deforms the compression chamber of the insert, until it clamps it onto the material. Once the i rivet nut is tightened, the riveting tool, the tie rod is unscrewed to release the thread that will accommodate the nut.
Setting phases:
■ Screwing
■ Introduction / Clamping
■ Unscrewing
APP-INS-MASCHIO-GB

CYLINDRICAL BLIND RIVET BOLTS

 

Cylindrical blind rivet bolts are the most commonly used ones.
CM-GB